dmesg - NVIDIA Jetson TK1
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.24-g6a2d13a (buildbrain@mobile-u64-389) (gcc version 4.5.3 (crosstool-NG hg_unknown@20110628.165246) ) #1 SMP PREEMPT Fri Apr 18 15:56:45 PDT 2014
CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Truncating memory at 0x80000000 to fit in 32-bit physical address space
Found vpr, start=0xf6900000 size=9700000
Found tsec, start=0xf4900000 size=2000000[ 0.000000] Found tegra_fbmem: 01f60000@ad012000
Tegra reserved memory:
LP0: f46ff000 - f46ff80f
Bootloader framebuffer: ad012000 - aef71fff
Bootloader framebuffer2: 00000000 - 00000000
Framebuffer: ef000000 - f01fffff
2nd Framebuffer: f0200000 - f45fffff
Carveout: 00000000 - 00000000
Vpr: f6900000 - ffffffff
Tsec: f4900000 - f68fffff
cma: CMA: reserved 16 MiB at ac000000
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 454656
free_area_init_node: node 0, pgdat c0c58c40, node_mem_map c0e09000
Normal zone: 1520 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 194560 pages, LIFO batch:31
HighMem zone: 2204 pages used for memmap
HighMem zone: 260096 pages, LIFO batch:31
DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm/boot/dts/tegra124-pm375.dts
Tegra12: CPU Speedo value 2352, Soc Speedo value 2320, Gpu Speedo value 2156
Tegra12: CPU Speedo ID 1, Soc Speedo ID 1, Gpu Speedo ID 1
Tegra12: CPU Process ID 1,Soc Process ID 1,Gpu Process ID 1
Tegra Revision: unknown SKU: 0x81 CPU Process: 1 Core Process: 1
tegra: PLLP fixed rate: 408000000
pll_d2: val=00583201 m=1 n=50 p_div=5 input_rate=12000000
pll_c4: val=00583201 m=1 n=50 p_div=5 input_rate=12000000
pll_dp: val=00583201 m=1 n=50 p_div=5 input_rate=12000000
Lowering cpu_lp maximum rate from 1350000000 to 1092000000
Lowering sbus maximum rate from 408000000 to 384000000
Lowering vic03 maximum rate from 900000000 to 828000000
Lowering tsec maximum rate from 900000000 to 828000000
Lowering msenc maximum rate from 600000000 to 528000000
Lowering se maximum rate from 600000000 to 528000000
Lowering vde maximum rate from 600000000 to 528000000
Lowering host1x maximum rate from 500000000 to 444000000
Lowering vi maximum rate from 700000000 to 600000000
Lowering isp maximum rate from 700000000 to 600000000
Lowering c4bus maximum rate from 700000000 to 600000000
Lowering pll_c maximum rate from 1400000000 to 1066000000
Lowering pll_c2 maximum rate from 1200000000 to 1066000000
Lowering pll_c3 maximum rate from 1200000000 to 1066000000
Lowering hdmi maximum rate from 594000000 to 297000000
Lowering nor maximum rate from 127000000 to 102000000
Lowering sdmmc1 maximum rate from 208000000 to 204000000
Lowering sdmmc3 maximum rate from 208000000 to 204000000
Lowering gbus maximum rate from 1032000000 to 852000000
Lowering cpu_g maximum rate from 3000000000 to 2320500000
tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled
tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
Switching to timer-based delay loop
tegra_powergate_init: DONE
PERCPU: Embedded 9 pages/cpu @c1cb5000 s15040 r8192 d13632 u36864
pcpu-alloc: s15040 r8192 d13632 u36864 alloc=9*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 453136
Kernel command line: fbcon=map:1 tegraid=40.1.1.0.0 mem=1862M@2048M memtype=255 vpr=151M@3945M tsec=32M@3913M otf_key=3b3781a373b0e3101de357094711a370 ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,3 console=tty1 usbcore.old_scheme_first=1 lp0_vec=2064@0xf46ff000 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0177:0x0000:0x03:0x43:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0177:0x0000:0x03:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait tegraboot=sdmmc gpt gpt_sector=49151 modem_id=0 android.kerneltype=normal
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1776MB = 1776MB total
Memory: 1739624k/1739624k available, 167064k reserved, 1040384K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbe800000 - 0xbfe00000 ( 22 MB)
.text : 0xc0008000 - 0xc0ab26e0 (10922 kB)
.init : 0xc0ab3000 - 0xc0b2fac0 ( 499 kB)
.data : 0xc0b30000 - 0xc0c6f57c (1278 kB)
.bss : 0xc0c6f57c - 0xc0cf6e7c ( 543 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:960
the number of interrupt controllers found is 5
Architected local timer running at 12.00MHz (phys).
sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
Ignoring duplicate/late registration of read_current_timer delay
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
ftrace: allocating 31874 entries in 63 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0xc07a7f78 - 0xc07a8014
ftrace: Allocated trace_printk buffers
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated.
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
CPA: inner cache maint threshold=2097152
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver
cpuidle: using governor ladder
cpuidle: using governor menu
tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default
gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
Wake16 for irq=34
Wake58 for irq=81
Wake41 for irq=129
Wake43 for irq=129
Wake40 for irq=53
Wake42 for irq=53
board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x03:0x43:0x00
disp1 pclk=154700000
disp2 pclk=297000000
Selecting UARTD as the debug console
The debug console clock name is uartd
ardbeg_modem_init: modem_id = 0
laguna_as3722_regulator_init: i2c_register_board_info
PMC dt information non-NULL tegra_init_suspend
PMC DT attribute cpu_off_timer=2000, board value=300
PMC DT attribute cpu_timer=2000, board value=500
PMC DT attribute suspend_mode=2, board value=3
Clear bootloader IO dpd settings
Loading jetson TK1 EMC tables.
tegra: pll_m is selected as scalable EMC clock source
Lowering emc maximum rate from 1200000000 to 924000000
tegra: validated EMC DFS table
laguna_edp_init: CPU regulator 15000 mA
laguna_edp_init: GPU regulator 8000 mA
swapper/0 isomgr_init(): iso emc max clk=924000KHz
swapper/0 isomgr_init(): max_iso_bw=6504960KB[ 0.487240] platform tegradc.0: IOVA linear map 0xef000000(1200000)
platform tegradc.0: IOVA linear map 0xf0200000(4400000)
platform tegradc.0: IOVA linear map 0xad012000(1f60000)
platform tegradc.0: IOVA linear map 0xf6900000(9700000)
platform tegradc.1: IOVA linear map 0xef000000(1200000)
platform tegradc.1: IOVA linear map 0xf0200000(4400000)
platform tegradc.1: IOVA linear map 0xad012000(1f60000)
platform tegradc.1: IOVA linear map 0xf6900000(9700000)
soctherm THERMTRIP is not supported on this PMIC
tegra11_soctherem_oc_int_init(): OC interrupts enabled successful
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
mc-err: Started MC error interface!
bio: create slab at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
of_get_named_gpio_flags exited with status 20
of_get_named_gpio_flags exited with status 21
of_get_named_gpio_flags exited with status 157
of_get_named_gpio_flags exited with status 158
of_get_named_gpio_flags exited with status 217
of_get_named_gpio_flags exited with status 218
of_get_named_gpio_flags exited with status 172
of_get_named_gpio_flags exited with status 173
of_get_named_gpio_flags exited with status 206
of_get_named_gpio_flags exited with status 207
as3722 4-0040: AS3722 with revision 0x1 found
gpiochip_add: registered GPIOs 256 to 263 on device: as3722-gpio
GPIO chip as3722-gpio: created GPIO range 0->7 ==> as3722-pinctrl PIN 0->7
as3722_sd0: 700 1300 mV at 1000 mV 3500 mA normal standby
as3722_sd1: 700 1350 mV at 1150 mV 2500 mA normal standby
as3722_sd2: 1350 mV normal standby
as3722-sd3: no parameters
as3722_sd4: 1050 mV normal standby
as3722_sd5: 1800 mV normal standby
as3722_sd6: applied init 1000000uV constraint
as3722_sd6: 650 1200 mV at 1000 mV 3500 mA normal standby
as3722_ldo0: 1050 1225 mV at 1050 mV at 300 mA normal standby
as3722_ldo0: supplied by as3722_sd2
as3722_ldo1: 1800 mV at 150 mA normal standby
as3722_ldo2: 1200 mV at 150 mA normal standby
as3722_ldo2: supplied by as3722_sd5
as3722_ldo3: 800 mV at 150 mA normal standby
as3722_ldo4: 2700 mV at 150 mA normal standby
as3722_ldo5: 1200 mV at 150 mA normal standby
as3722_ldo5: supplied by as3722_sd5
as3722_ldo6: 1800 3300 mV at 2700 mV at 150 mA normal standby
as3722_ldo7: 1050 mV at 150 mA normal standby
as3722_ldo7: supplied by as3722_sd5
as3722_ldo9: 3300 mV at 150 mA normal standby
as3722_ldo10: 2700 mV at 150 mA normal standby
as3722_ldo11: 1800 mV at 150 mA normal standby
of_get_named_gpio_flags: can't parse gpios property
of_get_named_gpio_flags: can't parse gpios property
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
fixed_reg_battery: 8400 mV normal standby
fixed_reg_aon_1v8: 1800 mV normal standby
fixed_reg_aon_3v3: 3300 mV normal standby
fixed_reg_aon_1v2: 1200 mV normal standby
fixed_reg_vdd_hdmi_5v0: 5000 mV normal standby
fixed_reg_vdd_hdmi: 3300 mV normal standby
fixed_reg_vdd_hdmi: supplied by as3722_sd4
fixed_reg_vdd_lcd_bl: 3300 mV normal standby
fixed_reg_lcd_bl_en: 5000 mV normal standby
fixed_reg_3v3: 3300 mV normal standby
fixed_reg_5v0: 5000 mV normal standby
fixed_reg_dcdc_1v8: 1800 mV normal standby
fixed_reg_as3722_gpio2: 3300 mV normal standby
fixed_reg_lcd: 3300 mV normal standby
fixed_reg_sdmmc_en: 3300 mV normal standby
fixed_reg_vdd_cdc_1v2_aud_pm375: 1200 mV normal standby
fixed_reg_usb2_vbus_pm359: 5000 mV normal standby
fixed_reg_usb0_usb1_vbus_pm359: 5000 mV normal standby
as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected
tegra: started io power detection dynamic control
tegra: NO_IO_POWER setting 0x2000
Switching to clocksource arch_sys_counter
nvmap_heap_init: nvmap_heap_init: created heap block cache
nvmap uc page pool size=54875 pages
nvmap pool = uc, highmem=25600, pool_size=54875,totalram=439002, freeram=410529, totalhigh=260096, freehigh=234364
nvmap wc page pool size=54875 pages
nvmap pool = wc, highmem=25600, pool_size=54875,totalram=439002, freeram=384830, totalhigh=260096, freehigh=208665
misc nvmap: created heap iram base 0x40001000 size (252KiB)
misc nvmap: created heap vpr base 0xf6900000 size (154624KiB)
nvmap:inner cache maint threshold=2097152
Wake39 for irq=52
tegra-otg tegra-otg: otg transceiver registered
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
host1x host1x: initialized
CPU PMU: probing PMU on CPU 0
hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
tegra_throttle : init passed
Tegra cpuquiet initialized: disabled
cpu-tegra: init EDP limit: 2320 MHz
thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm
thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm
thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm
thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
bounce pool size: 64 pages
NTFS driver 2.1.30 [Flags: R/O].
fuse init (API version 7.22)
msgmni has been set to 1397
io scheduler noop registered (default)
PCIE: port 0: link down, retrying
PCIE: port 0: link down, retrying
PCIE: port 0: link down, retrying
PCIE: port 0: link down, ignoring
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff]
pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [10de:0e13] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [io 0x0000-0x00ff]
pci 0000:01:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit]
pci 0000:01:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
PCI: bus1: Fast back to back transfers disabled
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
aer 0000:00:00.0:pcie02: service driver aer loaded
pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff]
pcieport 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff 64bit pref]
pcieport 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff 64bit pref]
pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff 64bit]
pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
pcieport 0000:00:00.0: PCI bridge to [bus 01]
pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff]
pcieport 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff]
pcieport 0000:00:00.0: bridge window [mem 0x12100000-0x121fffff 64bit pref]
PCIE: No Link speed change happened
pwm-backlight pwm-backlight: unable to request PWM, trying legacy API
sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found
msenc msenc: initialized
tsec tsec: initialized
isp isp.0: initialized
isp isp.1: initialized
vic03 vic03.0: initialized
gk20a gk20a.0: initialized
tegradc tegradc.0: DSI: Failed to get chip info
tegradc tegradc.0: DSI: HS clock rate is 464500
p,wuxga-10-1 panel dt support not available
tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000
tegradc tegradc.0: DSI pad calibration done
tegradc tegradc.0: probed
tegradc tegradc.0: probed
tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110
gpio wake4 for gpio=111
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
tegradc tegradc.1: probed
Console: switching to colour frame buffer device 240x67
tegradc tegradc.1: probed
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
hdmi_state_machine_worker (tid ebb0eac0): state 0 (Reset), hpd 1, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 0 (Reset)
tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra
hdmi_state_machine_worker (tid ebb0eac0): state 0 (Reset), hpd 1, pending_hpd_evt 0
hdmi_disable_l: audio_switch 0
hdmi_disable_l: hpd_switch 0
hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
hdmi_state_machine_worker (tid ebb0eac0): state 1 (Check Plug), hpd 1, pending_hpd_evt 0
hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID)
hdmi_state_machine_worker (tid ebb0eac0): state 2 (Check EDID), hpd 1, pending_hpd_evt 0
panel size 53 by 30
console [ttyS0] enabled
serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA
serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
loop: module loaded
nct1008_nct72 0-004c: success in enabling rail vdd_nct72
gpio wake35 for gpio=70
nct1008_nct72 0-004c: nct1008_probe: initialized
thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra
thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
tegra-sata tegra-sata.0: version 1.0
tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pio slum part sadm sds apst
scsi0 : tegra-sata
scsi1 : tegra-sata
ata1: SATA max UDMA/133 irq 55
ata2: DUMMY
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf017c000, 00:04:4b:21:28:76, XID 0c000800 IRQ 641
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
tegra USB phy - inst[1] platform info:
port_otg: no
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_HOST
vbus_gpio: -1
hot_plug: disabled
remote_wakeup: enabled
tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
Wake40 for irq=53
Wake42 for irq=53
tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Tegra EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.24-g6a2d13a ehci_hcd
usb usb1: SerialNumber: tegra-ehci.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
tegra USB phy - inst[2] platform info:
port_otg: no
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_HOST
vbus_gpio: -1
hot_plug: disabled
remote_wakeup: enabled
tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
Wake41 for irq=129
Wake43 for irq=129
tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Tegra EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.24-g6a2d13a ehci_hcd
usb usb2: SerialNumber: tegra-ehci.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-pci: EHCI PCI platform driver
tegra_xusb_read_usb_calib: usb_calib0 = 0x0245038a
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
usbcore: registered new interface driver pl2303
usbcore: registered new interface driver modem_boot_hsic
Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
tegra USB phy - inst[0] platform info:
port_otg: yes
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_DEVICE
vbus_pmu_irq: 0
vbus_gpio: -1
charging: disabled
remote_wakeup: disabled
tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
otg state changed: SUSPEND --> PERIPHERAL
usbcore: registered new interface driver xpad
as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0
as3722-rtc as3722-rtc.1: RTC interrupt 917
i2c /dev entries driver
nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
tegra_dtv_probe: probing dtv.
setup_stream: bufsize = 4096, bufnum = 4
ar0832_init: ++
i2c-core: driver [max77387] using legacy suspend method
i2c-core: driver [max77387] using legacy resume method
i2c-core: driver [as364x] using legacy suspend method
i2c-core: driver [as364x] using legacy resume method
[IMX135] sensor driver loading
[IMX179] sensor driver loading
[imx132] sensor driver loading
[ar0261] sensor driver loading
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: Invalid maximum block size, assuming 512 bytes
sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found
mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
mmc1: no vqmmc regulator found
mmc1: no vmmc regulator found
mmc1: Invalid maximum block size, assuming 512 bytes
sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found
mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
gpio wake56 for gpio=170
gpio wake56 for gpio=170
Enabling wake56
tegra-se tegra12-se: tegra_se_probe: complete
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc0: BKOPS_EN bit is not set
mmc0: new high speed DDR MMC card at address 0001
mmcblk mmc0:0001: Card claimed for testing.
mmcblk0: mmc0:0001 SEM16G 14.6 GiB
mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
Primary GPT is invalid, using alternate GPT.
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
usbcore: registered new interface driver snd-usb-audio
MAX98090 driver built on Apr 18 2014 at 15:54:15
ata1: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high-speed USB device number 2 using tegra-ehci
usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB 2.0 Hub
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
rt5639 0-001c: read 0xfd=0x6
rt5639 0-001c: ASoC: mux INR Mux has no paths
rt5639 0-001c: ASoC: mux INL Mux has no paths
gpio wake49 for gpio=143
usb 2-1.1: new low-speed USB device number 3 using tegra-ehci
usb 2-1.1: New USB device found, idVendor=04f2, idProduct=0833
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Keyboard
usb 2-1.1: Manufacturer: CHICONY
input: CHICONY USB Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input0
hid-generic 0003:04F2:0833.0001: input: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-tegra-ehci.2-1.1/input0
input: CHICONY USB Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.1/2-1.1:1.1/input/input1
hid-generic 0003:04F2:0833.0002: input: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-tegra-ehci.2-1.1/input1
usb 2-1.2: new full-speed USB device number 4 using tegra-ehci
usb 2-1.2: New USB device found, idVendor=1532, idProduct=000c
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Razer Lachesis
usb 2-1.2: Manufacturer: Razer
input: Razer Razer Lachesis as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
hid-generic 0003:1532:000C.0003: input: USB HID v1.00 Mouse [Razer Razer Lachesis] on usb-tegra-ehci.2-1.2/input0
input: Razer Razer Lachesis as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.1/input/input3
hid-generic 0003:1532:000C.0004: input: USB HID v1.00 Keyboard [Razer Razer Lachesis] on usb-tegra-ehci.2-1.2/input1
usb 2-1.3: new full-speed USB device number 5 using tegra-ehci
usb 2-1.3: New USB device found, idVendor=046d, idProduct=c223
usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.3: Product: G15 Keyboard Hub
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 4 ports detected
rt5639 0-001c: rt5639_headset_detect RT5639_PWR_ANLG1(0x63) = 0xa814
rt5639 0-001c: rt5639_headset_detect RT5639_IRQ_CTRL2(0xbe) = 0x0
rt5639 0-001c: rt5639_headset_detect jack_type = 2
tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 tegra30-i2s.1 mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi tegra30-spdif mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi tegra30-i2s.3 mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 dit-hifi mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi dit-hifi mapping ok
input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input4
sysedp_create_consumer: unable to create speaker, no consumer_data for speaker found
oprofile: using timer interrupt.
GACT probability NOT on
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
usb 2-1.3.1: new low-speed USB device number 6 using tegra-ehci
usb 2-1.3.1: New USB device found, idVendor=046d, idProduct=c226
usb 2-1.3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.3.1: Product: G15 Gaming Keyboard
input: G15 Gaming Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/input/input5
hid-generic 0003:046D:C226.0005: input: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-tegra-ehci.2-1.3.1/input0
input: G15 Gaming Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.1/input/input6
hid-generic 0003:046D:C226.0006: input: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-tegra-ehci.2-1.3.1/input1
NET: Registered protocol family 10
mip6: Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 35
usb 2-1.3.4: new full-speed USB device number 7 using tegra-ehci
NET: Registered protocol family 37
NET: Registered protocol family 41
usb 2-1.3.4: New USB device found, idVendor=046d, idProduct=c227
usb 2-1.3.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.3.4: Product: G15 GamePanel LCD
input: G15 GamePanel LCD as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.3/2-1.3.4/2-1.3.4:1.0/input/input7
hid-generic 0003:046D:C227.0007: input: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-tegra-ehci.2-1.3.4/input0
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
Registering SWP/SWPB emulation handler
last reset is due to software reset
Disabling clocks left on by bootloader:
audio_2x
audio
audio4
audio3
audio2
audio1
audio0
entropy
dsi2-fixed
dsi1-fixed
trace
bsev
cclk_lp
pll_x_out0
pll_u_12M
pll_m_out1
tegra_dvfs: registered vdd_cpu simon notifier
Tegra CPU DFLL is initialized with use_dfll = 1
CPU rate: 696 MHz
cpu_cold cooling device is registered
cpu_hot cooling device is registered
tegra dvfs: tegra sysfs cap interface is initialized
tegra dvfs: tegra sysfs gpu & emc interface is initialized
tegra dvfs: registered vdd_gpu simon notifier
tegra_actmon.emc: Completed initialization (0)
tegra_actmon.avp: Completed initialization (0)
tegra_mon.cpu_emc: Completed initialization (0)
as3722_ldo9: disabling
as3722_ldo1: disabling
of_get_named_gpio_flags exited with status 128
gpio wake51 for gpio=128
input: gpio-keys.2 as /devices/platform/gpio-keys.2/input/input8
as3722-rtc as3722-rtc.1: setting system clock to 2014-05-01 01:16:00 UTC (1398906960)
ALSA device list:
#0: HDA NVIDIA Tegra at 0x70038000 irq 113
#1: tegra-rt5639
handle_check_edid_l: audio_switch 1
Display connected, hpd_switch 1
EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled)
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:1.
devtmpfs: mounted
hdmi_state_machine_worker (tid ebb0eac0): state 4 (Enabled), hpd 1, pending_hpd_evt 0
panel size 53 by 30
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
handle_check_edid_l: audio_switch 1
Display connected, hpd_switch 1
hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 4 (Enabled)
hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 5 (Wait for HPD reassert)
init: plymouth-upstart-bridge main process (114) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (124) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (117) terminated with status 5
init: plymouth-upstart-bridge main process (128) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
systemd-udevd[265]: starting version 204
hdmi_state_machine_worker (tid ebb0eac0): state 5 (Wait for HPD reassert), hpd 1, pending_hpd_evt 0
hdmi_state_machine_set_state_l: switching from state 5 (Wait for HPD reassert) to state 0 (Reset)
hdmi_state_machine_worker (tid ebb0eac0): state 0 (Reset), hpd 1, pending_hpd_evt 0
hdmi_disable_l: audio_switch 0
hdmi_disable_l: hpd_switch 0
HDMI from connected to disconnected
hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
hdmi_state_machine_worker (tid ebb0eac0): state 1 (Check Plug), hpd 1, pending_hpd_evt 0
hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID)
hdmi_state_machine_worker (tid ebb0eac0): state 2 (Check EDID), hpd 1, pending_hpd_evt 0
panel size 53 by 30
handle_check_edid_l: audio_switch 1
Display connected, hpd_switch 1
hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled)
hdmi_state_machine_worker (tid ebb0eac0): state 4 (Enabled), hpd 1, pending_hpd_evt 0
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
Tegra cpuquiet clusterswitch enabled
otg state changed: PERIPHERAL --> SUSPEND
tegra-udc tegra-udc.0: USB cable/charger disconnected
otg state changed: SUSPEND --> HOST
tegra USB phy - inst[0] platform info:
port_otg: yes
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_HOST
vbus_gpio: -1
hot_plug: disabled
remote_wakeup: enabled
vi vi.0: vi_probe: ++
vi vi.0: initialized
vi vi.1: vi_probe: ++
vi vi.1: initialized
init: bluetooth main process (338) terminated with status 1
init: bluetooth main process ended, respawning
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
init: nvfb pre-start process (277) terminated with status 1
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
tegra-ehci tegra-ehci.0: Tegra EHCI Host Controller
tegra-ehci tegra-ehci.0: new USB bus registered, assigned bus number 3
tegra-ehci tegra-ehci.0: irq 52, io mem 0x7d000000
tegra-ehci tegra-ehci.0: USB 2.0 started, EHCI 1.10
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Tegra EHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.24-g6a2d13a ehci_hcd
usb usb3: SerialNumber: tegra-ehci.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
init: bluetooth main process (463) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (563) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (680) terminated with status 1
init: bluetooth main process ended, respawning
r8169 0000:01:00.0 eth0: link down
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: bluetooth main process (844) terminated with status 1
init: bluetooth main process ended, respawning
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
tegra_simon_gpu_grading_cb: graded gpu: v = 800, t = 32500, grade = 0
init: bluetooth main process (960) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (994) terminated with status 1
init: bluetooth main process ended, respawning
r8169 0000:01:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: bluetooth main process (1020) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1112) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1258) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1332) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1384) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1437) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1486) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1521) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1554) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1595) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1631) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1680) terminated with status 1
init: bluetooth main process ended, respawning
rt5639 0-001c: one bit hp_amp_power on=1 hp_amp_power_count=0
init: bluetooth main process (1747) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1853) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1918) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1954) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (1998) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2031) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2088) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2135) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2179) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2205) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2244) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2288) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2334) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2358) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2384) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2418) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2443) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2472) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2511) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (2541) terminated with status 1
init: bluetooth respawning too fast, stopped
rt5639 0-001c: one bit hp_amp_power on=0 hp_amp_power_count=1
init: failsafe main process (1160) killed by TERM signal
init: plymouth-stop pre-start process (3112) terminated with status 1
rt5639 0-001c: one bit hp_amp_power on=1 hp_amp_power_count=0
rt5639 0-001c: one bit hp_amp_power on=0 hp_amp_power_count=1
vgaarb: this pci device is not a vga device
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
rt5639 0-001c: one bit hp_amp_power on=1 hp_amp_power_count=0
rt5639 0-001c: one bit hp_amp_power on=0 hp_amp_power_count=1
tegra_dc_hdmi_irq: start
tegra_dc_hdmi_irq: end
hdmi_state_machine_worker (tid d2983080): state 4 (Enabled), hpd 0, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 5 (Wait for HPD reassert)
hdmi_state_machine_worker (tid d2983080): state 5 (Wait for HPD reassert), hpd 0, pending_hpd_evt 0
hdmi_state_machine_set_state_l: switching from state 5 (Wait for HPD reassert) to state 0 (Reset)
hdmi_state_machine_worker (tid d2983080): state 0 (Reset), hpd 0, pending_hpd_evt 0
hdmi_disable_l: audio_switch 0
hdmi_disable_l: hpd_switch 0
HDMI from connected to disconnected
hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
hdmi_state_machine_worker (tid d2983080): state 1 (Check Plug), hpd 0, pending_hpd_evt 0
hdmi_disable_l: audio_switch 0
hdmi_disable_l: hpd_switch 0
hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 3 (Disabled)
tegra_dc_hdmi_irq: start
tegra_dc_hdmi_irq: end
hdmi_state_machine_worker (tid d2983080): state 3 (Disabled), hpd 1, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 3 (Disabled) to state 0 (Reset)
hdmi_state_machine_worker (tid d2983080): state 0 (Reset), hpd 1, pending_hpd_evt 0
hdmi_disable_l: audio_switch 0
hdmi_disable_l: hpd_switch 0
hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
hdmi_state_machine_worker (tid d2983080): state 1 (Check Plug), hpd 1, pending_hpd_evt 0
hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID)
hdmi_state_machine_worker (tid d2983080): state 2 (Check EDID), hpd 1, pending_hpd_evt 0
panel size 53 by 30
handle_check_edid_l: audio_switch 1
Display connected, hpd_switch 1
hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled)
hdmi_state_machine_worker (tid d2983080): state 4 (Enabled), hpd 1, pending_hpd_evt 0
tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
tegra_dc_hdmi_irq: start
tegra_dc_hdmi_irq: end
hdmi_state_machine_worker (tid d2983080): state 4 (Enabled), hpd 0, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 5 (Wait for HPD reassert)
hdmi_state_machine_worker (tid d2983080): state 5 (Wait for HPD reassert), hpd 0, pending_hpd_evt 0
hdmi_state_machine_set_state_l: switching from state 5 (Wait for HPD reassert) to state 0 (Reset)
hdmi_state_machine_worker (tid d2983080): state 0 (Reset), hpd 0, pending_hpd_evt 0
hdmi_disable_l: audio_switch 0
hdmi_disable_l: hpd_switch 0
HDMI from connected to disconnected
hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
hdmi_state_machine_worker (tid d2983080): state 1 (Check Plug), hpd 0, pending_hpd_evt 0
hdmi_disable_l: audio_switch 0
hdmi_disable_l: hpd_switch 0
hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 3 (Disabled)